Gradall Forklift Parts

Gradall Forklift Part - The Gradall excavator was the creation of two brothers Ray and Koop Ferwerda. The excavator was created In the 1940's throughout WWII, when there was a shortage of labourers. Partners in a Cleveland, Richmond construction company known as Ferwerda-Werba-Ferwerda, the brothers faced a huge dilemma when lots of men left the labor force and signed up in the military, depleting existing laborers for the delicate finishing work and grading on highway projects. The Ferwerda brothers opted to make an equipment that would save their business by making the slope grading task less manual, easier and more efficient.

Their very first design prototype was a machine with two beams set on a rotating platform that was attached on top of a used truck. A telescopic cylinder moved the beams forward and backward which allowed the fixed blade at the end of the beams to pull or push dirt. Shortly improving the first design, the brothers built a triangular boom to add more strength. In addition, they added a tilt cylinder which let the boom turn 45 degrees in both directions. A cylinder was positioned at the back of the boom, powering a long push rod to enable the equipment to be outfitted with either a bucket or a blade attachment.

Gradall launched in 1992, with the introduction of the new XL Series hydraulics, the most innovative adjustment in their equipment since their creation. This new system of top-of-the-line hydraulics allowed the Gradall excavator to provide high productivity and comparable power to the more traditional excavators. The XL Series ended the first Gradall equipment power drawn from gear pumps and low pressure hydraulics. These conventional systems efficiently handled finishing work and grading but had a hard time competing for high productivity tasks.

The new XL Series Gradall excavators proved a significant increase in their digging and lifting ability. These models were manufactured along with a piston pump, high-pressure hydraulics system that showed immense improvements in boom and bucket breakout forces. The XL Series hydraulics system was even developed with a load-sensing capability. Conventional excavators make use of an operator to be able to choose a working-mode; where the Gradall system can automatically adjust the hydraulic power intended for the task at hand. This makes the operator's general task easier and even saves fuel simultaneously.

As soon as their XL Series hydraulics became available, Gradall was essentially thrust into the highly competitive market of machines designed to tackle pavement removal, excavation, demolition as well as different industrial work. Marketability was further enhanced with their telescoping boom due to its exclusive ability to work in low overhead areas and to better position attachments.

Click to Download the pdf

Forklift Parts

Scissor Lift Attachments

Attachment for Scissor Lift - The scissor lift, often acknowledged as a table lift, is an mechanized lift that has been tailored for use within wholesale and retail settings. Industrial platform lifts have been utilized for decades in the manufacturing and production industries to effectively elevate and lower people, supplies and gear. The scissor lift is a platform with wheels...

More

---

Forklift Alternators

Forklift Alternators - An alternator is actually a machine which transforms mechanical energy into electrical energy. This is done in the form of an electrical current. Basically, an AC electrical generator can be labeled an alternator. The word typically refers to a rotating, small machine driven by automotive and different internal combustion engines. Alternators that are placed in power stations...

More

---

Differentials for Forklifts

Forklift Differentials - A mechanical tool which could transmit rotation and torque via three shafts is referred to as a differential. At times but not at all times the differential will use gears and would function in two ways: in automobiles, it receives one input and provides two outputs. The other way a differential operates is to combine two inputs...

More

---

4 Wheel Drive Forklift Part

4 Wheel Drive Forklift Part - Commonly used in shipping plants, the pneumatic lift truck or pallet vehicle, can be used to carry materials that are positioned on top of pallets. A pneumatic lift truck usually has a set of metal blades installed on a wheeled counterbalance that also has a pump. The pump is used to raise and lower...

More

---

Simultaneous Fork Positioners

Simultaneous Fork Positioner - Load Protectors for forklifts could help reduce expensive scuffing, marring, scratching and chipping by means of providing a cushioned non-slip surface between the tines and load. These kinds of attachments can be moulded in accordance with OEM specifications from premium polyurethane. It is really fast to mount the Load Protectors since they fit right over the...

More

---

Parts for Telehandler

Parts for Telehandler - A telescopic handler or telehandler is a machine which is normally utilized in agricultural and industrial applications. It has the same look to a forklift and even functions in a similar manner, although, the telehandler is more of a crane than a forklift. It has a telescopic boom which could extend forward and upward from the...

More

---

Attachments for Gradall Forklifts

Attachments for Gradall Forklifts - The Gradall excavator was the brainchild of two brothers Koop and ray Ferwerda. The excavator was created In the 1940's all through WWII, when there was a shortage of workers. The brothers faced the problems of a depleted workforce due to the war. As partners in their Cleveland, Richmond construction company called Ferwerda-Werba-Ferwerda they lacked...

More

---

Attachment for Warehouse Forklifts

Attachments for Warehouse Forklift - Pneumatic forklifts are generally known as pallet trucks or pump trucks and are commonly utilized in warehouses and transport plants to transport resources on pallets. Pneumatic lifts include a pair of metal blades mounted on a wheeled counterweight that has a pump. The pump is used to elevate and lower the forks. Visually inspect the...

More

---